Allegro Pro USB 3.1 PCIe Card (4 10Gb charging ports) [Thunderbolt compatible] model no USB3-PRO-4P10-E

Add Four SuperSpeed+ 10Gbps USB-A Connections for Maximum Flexibility

SuperSpeed+ 10Gbps USB Ports	Adds four 10Gbps USB-A ports to your Mac Pro, Windows PC, or Linux⁽¹⁾ computer with PCIe slots; or Thunderbolt to PCIe card expansion system
Dual USB 3.1 Gen 2 Controllers	Support data transfers at up to twice as fast as USB 3.0 and USB 3.1 Gen 1, and boost data transfer speeds between connected drives
Powered Ports	Supports USB bus-powered SSD, SSD RAID, and hard drive devices with up to 7.5W power per port
Supports Charge & Sync	Supports USB 3.0 charging port handshake, and will simultaneously sync and charge iPads and other devices that support USB 3.0 charging at 1.5A per device
Protected Power Delivery	Independent power regulation isolates each port to prevent cross-coupled power glitches that may cause accidental disconnects; resettable device overcurrent fuses protect the card and computer, and may be reset by a simple shutdown
Optimized for Thunderbolt	Provides maximum performance over Thunderbolt
Easy Installation	Quick and easy user installation into any available PCIe slot
Broad USB Device Support & Compatibility	Supports storage, hubs, and other USB-IF compliant USB devices

Bus Interface	PCI Express 2.0 x4
Peripherals Supported	Industry standard USB 3.1 Gen 2, 3.0, 2.0, and 1.1
Bus Powered Peripherals Supported	HD, SSD, SSD RAID Up to 7.5W per port for operation or charging
Cables Supported	USB-A 10Gbps USB-A 5Gbps USB-A 480Mbps
Chipset	2x ASMedia 1142
RoHS Compliant	Yes
Package Contents	Package Contents
Thunderbolt Compatibility	Supports USB 3 peripherals on a Mac or Windows PC when installed in a Thunderbolt 2 or Thunderbolt 3 PCIe expansion system macOS 10.12.6+ Windows 10 Build 1709 or newer (64-bit edition)

Standard	Complies with OHCI (Open Host Controller Interface), EHCI (Enhanced Host Controller Interface), and xHCI (eXtensible Host Controller Interface) standards
UASP	USB attached SCSI protocol supported under macOS 10.10 & 10.12+, Windows 10
USB Charging	USB Battery Charging 1.2 compliant (up to 7.5W per port)
Chipset Throughput	20Gbps combined port throughput
Number of Devices Supported	Up to 62
Hot Plug	Supports hot-pluggable and hot swappable device connection
Boot Support	No computers support booting at this time
Mac Compatibility	Mac Pro® 3,1, 4,1 or 5,1 macOS 10.10.5, 10.12.6+⁽¹⁾ (not compatible with macOS 10.11) macOS Mojave compatible
Windows Compatibility	Computer with PCIe slots Windows 10, 8.1, 7 Windows Server 2016, 2012, and 2008 (64-bit editions)
Linux Compatibility	Computer with PCIe slots Linux 4.12+ Kernel (LTS version only)

There are no reviews for this product.

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Allegro Pro USB 3.1 PCIe Card (4 10Gb charging ports) [Thunderbolt compatible] model no USB3-PRO-4P10-E

Qty